String buffers are safe for use by multiple threads. The methods are synchronized where necessary so that all the operations on any particular instance behave as if they occur in some serial order that is consistent with the order of the method calls made by each of the individual threads involved.
The principal operations on a StringBuffer are the
append and insert methods, which are
overloaded so as to accept data of any type. Each effectively
converts a given datum to a string and then appends or inserts the
characters of that string to the string buffer. The
append method always adds these characters at the end
of the buffer; the insert method adds the characters at
a specified point.
For example, if z refers to a string buffer object
whose current contents are "start", then
the method call z.append("le") would cause the string
buffer to contain "startle", whereas
z.insert(4, "le") would alter the string buffer to
contain "starlet".
In general, if sb refers to an instance of a StringBuffer,
then sb.append(x) has the same effect as
sb.insert(sb.length(), x).
Whenever an operation occurs involving a source sequence (such as appending or inserting from a source sequence) this class synchronizes only on the string buffer performing the operation, not on the source.
Every string buffer has a capacity. As long as the length of the character sequence contained in the string buffer does not exceed the capacity, it is not necessary to allocate a new internal buffer array. If the internal buffer overflows, it is automatically made larger. As of release JDK 5, this class has been supplemented with an equivalent class designed for use by a single thread, StringBuilder . The StringBuilder class should generally be used in preference to this one, as it supports all of the same operations but it is faster, as it performs no synchronization.
16 plus the length of the string argument.CharSequence. The initial capacity of
the string buffer is 16 plus the length of the
CharSequence argument.
If the length of the specified CharSequence is
less than or equal to zero, then an empty buffer of capacity
16 is returned.
CharSequence to this
sequence.
The characters of the CharSequence argument are appended,
in order, increasing the length of this sequence by the length of the
argument.
The result of this method is exactly the same as if it were an invocation of this.append(s, 0, s.length());
This method synchronizes on this (the destination)
object but does not synchronize on the source (s).
If s is null, then the four characters
"null" are appended.
The characters of the StringBuffer argument are appended, in order, to the contents of this StringBuffer, increasing the length of this StringBuffer by the length of the argument. If sb is null, then the four characters "null" are appended to this StringBuffer.
Let n be the length of the old character sequence, the one
contained in the StringBuffer just prior to execution of the
append method. Then the character at index k in
the new character sequence is equal to the character at index k
in the old character sequence, if k is less than n;
otherwise, it is equal to the character at index k-n in the
argument sb.
This method synchronizes on this (the destination)
object but does not synchronize on the source (sb).
The equals method implements an equivalence relation
on non-null object references:
x, x.equals(x) should return
true.
x and y, x.equals(y)
should return true if and only if
y.equals(x) returns true.
x, y, and z, if
x.equals(y) returns true and
y.equals(z) returns true, then
x.equals(z) should return true.
x and y, multiple invocations of
x.equals(y) consistently return true
or consistently return false, provided no
information used in equals comparisons on the
objects is modified.
x,
x.equals(null) should return false.
The equals method for class Object implements
the most discriminating possible equivalence relation on objects;
that is, for any non-null reference values x and
y, this method returns true if and only
if x and y refer to the same object
(x == y has the value true).
Note that it is generally necessary to override the hashCode method whenever this method is overridden, so as to maintain the general contract for the hashCode method, which states that equal objects must have equal hash codes.
java.util.Hashtable.
The general contract of hashCode is:
hashCode method on each of
the two objects must produce the same integer result.
As much as is reasonably practical, the hashCode method defined by class Object does return distinct integers for distinct objects. (This is typically implemented by converting the internal address of the object into an integer, but this implementation technique is not required by the JavaTM programming language.)
wait methods.
The awakened thread will not be able to proceed until the current thread relinquishes the lock on this object. The awakened thread will compete in the usual manner with any other threads that might be actively competing to synchronize on this object; for example, the awakened thread enjoys no reliable privilege or disadvantage in being the next thread to lock this object.
This method should only be called by a thread that is the owner of this object's monitor. A thread becomes the owner of the object's monitor in one of three ways:
synchronized statement
that synchronizes on the object.
Class, by executing a
synchronized static method of that class.
Only one thread at a time can own an object's monitor.
wait methods.
The awakened threads will not be able to proceed until the current thread relinquishes the lock on this object. The awakened threads will compete in the usual manner with any other threads that might be actively competing to synchronize on this object; for example, the awakened threads enjoy no reliable privilege or disadvantage in being the next thread to lock this object.
This method should only be called by a thread that is the owner
of this object's monitor. See the notify method for a
description of the ways in which a thread can become the owner of
a monitor.
The current thread must own this object's monitor. The thread
releases ownership of this monitor and waits until another thread
notifies threads waiting on this object's monitor to wake up
either through a call to the notify method or the
notifyAll method. The thread then waits until it can
re-obtain ownership of the monitor and resumes execution.
As in the one argument version, interrupts and spurious wakeups are possible, and this method should always be used in a loop:
synchronized (obj) {
while (<condition does not hold>)
obj.wait();
... // Perform action appropriate to condition
}
This method should only be called by a thread that is the owner
of this object's monitor. See the notify method for a
description of the ways in which a thread can become the owner of
a monitor.The current thread must own this object's monitor.
This method causes the current thread (call it T) to place itself in the wait set for this object and then to relinquish any and all synchronization claims on this object. Thread T becomes disabled for thread scheduling purposes and lies dormant until one of four things happens:
A thread can also wake up without being notified, interrupted, or timing out, a so-called spurious wakeup. While this will rarely occur in practice, applications must guard against it by testing for the condition that should have caused the thread to be awakened, and continuing to wait if the condition is not satisfied. In other words, waits should always occur in loops, like this one:
synchronized (obj) {
while (<condition does not hold>)
obj.wait(timeout);
... // Perform action appropriate to condition
}
(For more information on this topic, see Section 3.2.3 in Doug Lea's
"Concurrent Programming in Java (Second Edition)" (Addison-Wesley,
2000), or Item 50 in Joshua Bloch's "Effective Java Programming
Language Guide" (Addison-Wesley, 2001).
If the current thread is interrupted by another thread while it is waiting, then an InterruptedException is thrown. This exception is not thrown until the lock status of this object has been restored as described above.
Note that the wait method, as it places the current thread into the wait set for this object, unlocks only this object; any other objects on which the current thread may be synchronized remain locked while the thread waits.
This method should only be called by a thread that is the owner
of this object's monitor. See the notify method for a
description of the ways in which a thread can become the owner of
a monitor.
This method is similar to the wait method of one
argument, but it allows finer control over the amount of time to
wait for a notification before giving up. The amount of real time,
measured in nanoseconds, is given by:
1000000*timeout+nanos
In all other respects, this method does the same thing as the method of one argument. In particular, wait(0, 0) means the same thing as wait(0).
The current thread must own this object's monitor. The thread releases ownership of this monitor and waits until either of the following two conditions has occurred:
notify method
or the notifyAll method.
timeout
milliseconds plus nanos nanoseconds arguments, has
elapsed.
The thread then waits until it can re-obtain ownership of the monitor and resumes execution.
As in the one argument version, interrupts and spurious wakeups are possible, and this method should always be used in a loop:
synchronized (obj) {
while (<condition does not hold>)
obj.wait(timeout, nanos);
... // Perform action appropriate to condition
}
This method should only be called by a thread that is the owner
of this object's monitor. See the notify method for a
description of the ways in which a thread can become the owner of
a monitor.